P0760 — Shift Solenoid "C" Malfunction
Drive with caution — fix soon.
What P0760 means
P0760 means the transmission control module has detected a malfunction in shift solenoid "C". This solenoid directs transmission fluid to engage particular gears, so a fault can cause incorrect shifting or being stuck in gear. The cause is often the solenoid itself, its wiring, or low transmission fluid.
Common symptoms
- Check Engine light is on
- Harsh or unpredictable shifting
- Transmission stuck in one gear
- Slipping or flaring between gears
- Reduced acceleration or performance
Common causes
- Faulty shift solenoid "C"
- Low, old, or contaminated transmission fluid
- Wiring or connector faults in the solenoid circuit
- Clogged valve body or fluid passages
- Faulty transmission control module
Typical repair cost
$150 – $500
Varies by vehicle and root cause.
Frequently asked questions
Can I keep driving with a P0760 code?
For short distances, usually yes, but you shouldn't lean on it. Rough shifting or being stuck in gear can stress the transmission, so get it checked soon and skip towing or long highway runs.
How much does it cost to fix a P0760?
Expect roughly $150 to $500 depending on the cause. Fluid or wiring fixes are cheaper, while solenoid replacement or valve body service costs more.
Is a P0760 code serious?
It's a moderate concern. The car usually still drives, but ignoring it risks bigger transmission damage, so it's smart to address it without long delays.
Could low transmission fluid alone trigger P0760?
Yes. Low or dirty fluid can keep the solenoid from working properly and set this code. A fluid check and service is often the first and cheapest step before replacing parts.